vacumforming yay

today i finally got my clock vacuumed after i stuck on the layers there are before and after photos too.
although i did run into a problem that made me very anxious while my clock was being vacuumed formed. which was that i had net made all my layers the exact same shape but there was only minor consequence's luck for me as now i have a line on the top part of my clock but that inspired me to do a banana so now my clock is a panda/dog/nijia. which i think is quite original!  i worked fairly well as at the start of the lesson i had to also glue all the layers on  so now my clock is pretty much done accept that i have to paint over the weekend the final picture will be on my next bog. Don't forget to check out my photos at the bottom
Maddy



 

definitions

Polymers - is a substense with a molucul structure of a large amount of similar units bonded togeher

 

Thermoplastic - is a Denoting substance that when heated becomes a haredned plastic when cooled. eg. spectacle frames, tool handles and photographic film

 

thermosetting- a material when heated permently stays hard

eg. home applinces, body of veicheles and

Vacuum forming - is when a sheet of plastic is heated on an object then then applying a vacum between the mould and plastic sheet.

eg. product packaging, speaker casings and car dashboards

Sustainability –  plastic does cause harm to the enviroment such as polluting river systems and oceans. eg. turtles natural food source is the jelly accept now many turtles are mistaling plastic bags with jellyfish therefore when they eat them they choke and sadly die beacues someon may have just thrown a plastic bag out of the car.

                                   steps you and your family can take to reduce plastic

 

there are steps you and your family can take to reduce plastic

1.as say when you go groccery shopping bring a couple of non plastic bags to the store instead of using the ones given to you.

2.recycle as much as possible

 

for more tips click on the web adress eco.allpurposeguru.com/2011/.../plastic-and-environmental-problems

 vacum former

eighth lesson

today i ran into my first problem , i cut my layers too small nooooooooo! SO this lesson i spent redoing my fist and second layer which was really difficult because i had to keep waiting for the tinsnips [ i hate problems] Anyway i managed to to re-do my firstt layer which by the way is perfect. Though i swear someone muddles with the time while were doing Design futures because it feels like its ten minutes,also i spotted a little crack in the wood so i sanded that back. Thus i got through a fair bit but i am determined o finish all my layers next lesson

seventh lesson

This lesson i achieved what i set out to do which was to finish sanding and filling and start to cut out my first layer. I probably spent more time on filling and sanding than i would have liked though its one of the important things that need to be done as if the wood doesn't match up with the photo disaster will strike. Although i did finish cutting out the first layer which was a success so i did complete everything i wanted today so it was a successful lesson also i hoping i am not going to run into any problems as i know some people have.

Sixth lesson

Finally i was first to get my clock cut out so i got off to a really good start and went straight to filing it,the reason why we have to file the wood is because that Mr Andrews cant carve out all the fine details of the clock also its to get a better shape such as round corners ect. already i have caught up to everyone in the class and i spent this lesson filling and sanding back my clock which i rather enjoy , though to anyone who is reading this i think we need some chairs because hunching over for 50 mins really hurts your back as well as being bad for your posture. I am pretty much done filling and sanding though i might spend around half and hour finishing up all the minor bits next lesson , overall it was a very productive hour. Cant wait to the next lesson Maddy.

fifth lesson

today was the first lesson in the workshop, which was a complete waste of time as when Mr Andrew and finished speaking about was going on this lesson i spent the rest of the time waiting in a line to get my wood cut out so it would line up with my photograph. But i guess thats because it was the first lesson in the workshop and there are 21 of us and only 1 of Mr Andrews to cut all our wood. Although the thing i found most annoying is that the person in front of me 'Daisy' had just finished getting her wood cut and i was next accept that the bell rang so that was all did this lesson.

P.S I hope I get more done next lesson

Fourth lesson

Today was rather successful as I managed to print out my pictures of my design which takes a while as everyone needs to and there is only one printer. Though I did have some trouble with the size of the picture as the original size was much too small, so after about ten goes with the printer I finally accomplished the perfect size. At first I thought deciding on how I would do my layers would be difficult but after I broke it down into the actually layers I discovered that it was as easy as it looked so now I will be ready to go into the workshop by lesson five which is fantastic! I have my fingers crossed that everyone has been able to complete all the tasks set so we can enter the workshop as I am really excited to take the next step and really put my clock to life. Overall I think I accomplished a lot this lesson as after I had finished designing my layers I had time to research materials that I might be able to use for the construction of my clock also I found out that I can use googly eyes on my clock which I think will look fully cute on my baby pandas face as-well as making the yes really stand out. This picture is what my clock will look like as I am only doing the face of the original photoh in my last post.